VLSI Training in Hyderabad – ChipXpert (Madhapur)

VLSI Training in Hyderabad — Inside the Madhapur Centre

ChipXpert runs its Hyderabad VLSI training centre in Madhapur, inside the HITEC City corridor, with classroom and live-online batches in Physical Design, Design Verification (UVM), DFT, RTL Design and Analog Layout — every one of them taught on industry-standard Cadence, Synopsys and Siemens EDA tools that students open straight from a browser, with no installation and no high-end laptop required.

Why Hyderabad is a serious place to start a VLSI career

Hyderabad is one of only two Indian cities where chip design happens at scale rather than in isolated teams. The belt running from Madhapur through HITEC City, Kondapur, Gachibowli and the Financial District hosts design and engineering centres for semiconductor companies including Qualcomm, Micron, AMD and Analog Devices, engineering-services firms such as Cyient, and Indian offices of the EDA vendors themselves — Synopsys and Cadence among them. For a student that density matters in three practical ways: interview cycles run through the year instead of one campus season, referral chains are short because former classmates sit in the same buildings, and a first job and a fifth job can be inside the same ten kilometres.

ChipXpert has no hiring agreement with any company named above. They are listed to describe Hyderabad’s employment landscape — not to imply a placement tie-up or a guaranteed offer.

Courses running at the Hyderabad centre

• ASIC Physical Design — floorplan, power plan, placement, CTS and routing on Cadence Innovus, carried through to timing closure on a real block.
• ASIC Design Verification (SystemVerilog + UVM) — building a testbench up from driver and monitor to a full UVM environment with assertions and functional coverage.
• DFT — Design for Testability — scan insertion, ATPG, compression and the pattern-debug loop that DFT interviews actually test.
• Advanced RTL Design — synthesisable SystemVerilog, lint and CDC discipline, and the micro-architecture reasoning that decides fresher RTL interviews.
• Analog Layout Design — Cadence Virtuoso, device matching and shielding technique, and a DRC/LVS-clean finish.

VLSI course fees in Hyderabad

Most Hyderabad enquiries start with the fee, so here it is in full rather than buried in a callback. The same four options apply whichever specialisation you pick; the classroom row is the Madhapur centre specifically.

One fee covers the chosen specialisation — Physical Design, Design Verification, DFT, RTL Design, Analog Layout or RISC-V. The current, complete price list is maintained on the VLSI course fees page.

Batch schedule at the Madhapur centre

The next ChipXpert cohort starts on 7th October 2026. Hyderabad learners can attend the Madhapur classroom, join the very same batch live online, or move between the two. Because the lab is browser-delivered, tool practice carries on at home between sessions rather than stopping at the classroom door.

Session timings are confirmed at enrolment — call +91 83098 18310 for the current slot list, or see every track’s start date on the course calendar.

Getting to the Madhapur centre

The centre is on the 4th floor of Radhe Heights, in the VIP Hills / Silicon Valley pocket of Madhapur (Hyderabad 500081) — the residential-and-office block just off the Cyber Hills Colony side of Madhapur, a short drive from Cyber Towers. By metro, HITEC City and Raidurg on the Blue Line are the closest stations, both a few minutes away by auto. By road it is a straightforward run from Gachibowli, Kondapur, Jubilee Hills and Kukatpally along the Madhapur main road, and from Ameerpet, Begumpet or Secunderabad via the Jubilee Hills route. The map pin, the full address and the phone number are in the “Find ChipXpert Hyderabad on Google” panel further down this page.

Tools and skills you practise in the Hyderabad lab

Interviews in the HITEC City corridor are practical: candidates get asked what they did when a block would not close timing, or how they debugged an ATPG pattern that failed on silicon. These are the skills the Madhapur lab is built around, all exercised on industry-standard Cadence, Synopsys and Siemens tools rather than described on slides.

How to judge a VLSI institute in Hyderabad

Hyderabad has a crowded training market and the marketing sounds identical across it. These are the questions worth asking anywhere in the city, and what the honest answer is here.

What Hyderabad students get

ChipXpert has trained 5,000+ engineers and holds a 4.7 rating from 600+ Google reviews across its Hyderabad and Bengaluru centres. Every course includes placement assistance — resume work, mock interviews and interview preparation. That is assistance, deliberately not a guaranteed job offer. Still weighing the two cities? Read Hyderabad vs Bangalore for VLSI engineers, or look at our VLSI training institute in Bangalore centre.