FPGA design course syllabus: Vivado and Quartus flows
FPGA design builds on RTL skills: architecture, HDL coding, synthesis and implementation, timing constraints and debug on the Vivado and Quartus flows.
This page outlines the FPGA design training. FPGA design builds directly on RTL skills, so it pairs well with the Advanced RTL Design course. See the Advanced RTL Design course.
FPGA architecture
LUTs, flip-flops, block RAM, DSP blocks, clocking and I/O.
HDL for FPGA
Writing synthesizable Verilog or VHDL for FPGA targets.
FPGA design flow
Synthesis, implementation (place and route) and bitstream generation.
Timing constraints
Clock definitions, I/O constraints and timing closure.
Simulation and debug
Testbenches, waveform debug and on-chip debug techniques.
IP and interfaces
Using vendor IP blocks and common interfaces.
FPGA prototyping vs ASIC
How FPGA is used to prototype ASIC designs.
Project
An end-to-end FPGA design from specification to working implementation.
Who should join
B.E / B.Tech, M.E / M.Tech and M.Sc students and graduates in ECE, EEE and related branches, and working engineers moving into VLSI.
Roles this prepares you for
- FPGA Design Engineer
- RTL Design Engineer
- Embedded Hardware Engineer
ChipXpert provides placement assistance: resume building, mock interviews and interview preparation. It is assistance with your job search, not a guarantee of employment.
Formats and locations
Live-online VLSI training and classroom options at our Hyderabad centre in Madhapur and Bengaluru centre in Bellandur. Confirm the timetable, recordings and EDA lab-access terms for your chosen batch with admissions. Explore the RTL Design hub and the batch calendar.
Frequently asked questions
Which FPGA tools are covered?
The course follows the Vivado and Quartus design flows.
Is FPGA design useful for ASIC careers?
Yes. RTL coding, timing and verification skills carry over, and FPGAs are widely used to prototype ASICs.
Skills you will gain
- FPGA architecture
- HDL coding
- Timing constraints
- Implementation flow
- Debug
Project work
Project work is modelled on industry practice. Typical project themes:
- An FPGA design implemented end to end
Interview topics you will be ready for
- LUT-based logic
- Clock constraints in FPGA flows
- Block RAM vs distributed RAM
- FPGA vs ASIC
Learning path
Start with digital electronics fundamentals, learn the domain through the syllabus above, build project work, then prepare for interviews with mock rounds and resume reviews. Our beginner VLSI course is the starting point if you are new to VLSI.
Where we train
Hyderabad: our centre is in Madhapur, close to Hyderabad, Madhapur, HITEC City, Gachibowli, Kondapur, Kukatpally, Ameerpet, Secunderabad. Bengaluru: our centre is in Bellandur, close to Bengaluru, Bellandur, Marathahalli, HSR Layout, Koramangala, Sarjapur Road, Whitefield, Electronic City. Live online batches run across India and overseas.
More questions answered
What are the fees?
Programme fees run from ₹45,000 to ₹90,000 + applicable taxes depending on the format. See the fee page for the full table. EMI options over 3 to 6 months are available.
Is there a discount?
Yes. Eligible B.Tech/B.E, M.Tech/M.E and M.Sc students may receive up to 60% merit scholarship after a short aptitude interaction.
Is there a free demo class?
Yes. The demo class is free; share your details and a counsellor will arrange it.
Do you provide a course certificate and placement help?
Yes, a course certificate and placement assistance: resume building, mock interviews and interview preparation. Placement assistance is support for your job search, not a guarantee of employment.
When does the next batch start?
Next confirmed batch starts 9th December 2026. See the course calendar.
Keep reading